Syma X8PRO GPS WiFi RC Quadcopter With 720p HD Camera

Weight: (0.620), Flying Height: (70 Meter), Camera: (Yes), Flying Time: (10-12 Minute), GPS Return Home: (Yes)Features: GPS Positioning and Hover, GPS Return to Home, Low Battery and RC Disconnect Return to Home, WiFi FPV in real time, Remote controlled 90 Degree Adjustable HD Camera (Photos and Video Recording directly to Smartphone via APP), Multiple Flight modes : Surround Flight, Follow Me, Map Guided Flight, Waypoint, Direct APP Control via Smartphone, Barometric Sensors allow Hover Flight, Headless Mode, Low Battery and Overcurrent protection, Wifi FPV distance: About 70m, Remote control distance:

Please Carefully read the instruction manual before any use, if you are a beginner, it’s advisable to be assisted by an experienced adult. This quadcopter has powerful,ultra-responsive motors. Don’t push the throttle up hard directly. Adjust the throttle slowly and gently to keep control.How to bind the drone and the transmitter?First, turn on the quadcopter power switch, place it in a horizontal position, then turn on the transmitter. Push the left throttle lever to the highest position, and then pull it back to the lowest position. You will hear a clear “di, di” sound and the indicator light will stop flashing and just stay lit, meaning the frequency adjustment is completed and your quadcopter is ready to take off.Why one or more motors don’t work?When binding, the drone should be on a flat surface. please match the drone and controller successfully and install the propellers on the right position, otherwise, the drone will not take off. If the drone is flying to on side dramatically or spinning while hovering, please switch off the power of both controller and drone and then match the drone and controller again. Avoiding overcharging and excessive discharging the battery.Why the indicator light of the drone is flashing & the drone cannot take off?1. The quadcopter is not binding to the transmitter correctly, please refer to the user manual to re-modulate the frequency;2. Battery power is insufficient, recharge the battery.3. Check whether the blades are installed correctly.Does the Drone fail to connect with the remote?Before binding, make sure the battery is full. Then turn on the drone and then remote